4 - English
ASSEMBLY
Fig. 6
Fig. 7
cAUTION:
To reduce the risk of injury, never attempt to lift the
work station until the rear leg has been properly
secured in place.
fOLDING AND/OR cARRYING THE WORK
STATION
See Figures 5 - 7.
Pull the lock / unlock latch up to unlock.
Step down on the foot pedal letting the pedal rise
to release the clamps.
Place the arm transport lock in the locked position.
Turn the work station over and place it upside down on
the ground.
Unlock the left front lock knob by turning the knob one
half turn. Lower the left front leg until the leg rests on the
housing.
Repeat with the right front lock knob and right front leg.
Place a finger in the foot pedal release and pull up to
unlock the foot pedal.
Lower the foot pedal until it rests on the housing.
Unlock the rear lock knob by turning the knob counter-
clockwise.
Pull up on the rear leg and slide the leg toward the front
of the work station.
Once the rear leg is resting on the housing, slide the rear
leg back.
With the rear leg pushed back as far as it will go, slide
the rear leg into the leg storage hole.
Turn the rear lock knob clockwise to tighten securely.
NOTE:
When transporting the work station, the rear leg
becomes the carrying handle.
LEFT
FRONT
LEg
RIghT
FRONT
LEg
FOOT PEDAL
RELEASE
REAR
LEg
Fig. 5
REAR LOCK
KNOB
LEg STORAgE
hOLE
