10
ASSEMBLY
EXTENSION BAR(S) OPERATION
See Figures 10 - 11.
Both extension bars may be adjusted to provide maximum
workpiece support. To adjust the extension bars:
n
Loosen adjustable handle by turning counter clock-
wise.
NOTE:
Adjustable handle can be repositioned if
necessary. Lift up on handle and rotate to desired
position then release handle.
n
Slide out extension bar to desired position and tighten
extension bar handle.
ADJUSTABLE
HANDLE
LOCKING PIN
KNOB
NOTE:
There is a catch to limit the overall extension bar
travel.
n
Pull out on locking pin knob and swing leg down until
locking pin locks leg in the down position.
n
Turn foot knob counterclockwise to loosen and slide
foot extension down until foot contacts the floor. Tighten
foot knob.
n
Repeat for the other extension bar.
NOTE:
It may be necessary to realign roller assemblies with
the miter saw table. See
Mounting and Aligning Roller
Assembly
on page 9.
LEG
FOOT
KNOB
Fig. 11
Fig. 10
Содержание AC99401
Страница 14: ...14 NOTES ...