5
Assembly
Attaching the Lower Foot
1. Place stand assembly “flat” on floor.
2. Rotate lower foot into upright position
aligning holes as shown.
3. Locate the following parts:
M6 x 41mm bolt .................................. 2
M6 Flat Washer .................................. 4
M6 Locknut ......................................... 2
4. Install bolt, two washers and nut as
shown. Finger tighten nut.
5. Repeat step 4 on the opposite side.
6. Tighten all four nuts.
M6 x 41mm
Hex Bolt
Washer
M6
Lock Nut
M6
