9
Assembling Upper and Lower
Legs
1. Locate the following parts and hard-
ware:
8
Carriage Bolts 5/16-18 x 5/8"
8
Hex Flanged Nuts 5/16-18
4
Lower Legs (with leveling
feet
attached)
4
Upper Legs
2. Position the lower leg inside the upper
leg for the desired height setting.
NOTE: The minimum height of the leg-
stand is 24" and the maximum is 34". The
distance between holes in the lower leg(s)
is approximately 2-1/2". The actual height
setting will depend on the type of tool and
the operator’s preference.
3. Place a carriage bolt through only the
bottom hole of the upper leg and then
throught the desired hole in the lower
leg. Finger tighten nut.
Hex Flanged Nut
5/16-18
Carriage Bolts
5/16-18 x 5/8
Lower Leg w/
Leveling Foot
Upper Leg
