RIDGID 76430, Руководство пользователя

Страница: 13 / 49

278-104-431.10_REV. C 11
K-50 Drain Cleaning Machine
Accessories
Only the following RIDGID products have
been designed to function with the K-50 Drain Cleaning
Machine. Other accessories suitable for use with other
tools may become hazardous when used on the K-50. To
prevent serious injury, use only the recommended ac-
cessories.
NOTE! See Ridge Tool Catalog for complete list of tools
and accessories.
Maintenance Instructions
WARNING
Make sure machine is unplugged from power
source before performing maintenance or mak-
ing any adjustment.
Lubrication
Lubricate machine with grease at grease fitting (located on
jaw housing) once a week if used every day; once a
month if used less. Place a drop of oil on each of the bear-
ing points, thrust bearing, clutch jaws, etc., at least once
a year.
Cables
Cables should be thoroughly flushed with water to prevent
damaging effects of sediment and drain cleaning com-
pounds. Periodically lubricate cables and couplings with
RIDGID Cable Rust Inhibitor.
When not in use, store cables indoors to prevent dete-
rioration by the elements.
Catalog Model
No. No. Description
59235 A-14-6 6' Rear Guide Hose
84325 A-14-10 10' Rear Guide Hose
59270 A-18 Front Guide Hose Assembly
59210 A-10 Cable Carrier (Holds 90' C-8, C-9)
59205 A-1 Left-Hand Mitt
59295 A-2 Right-Hand Mitt
59230 A-13 Pin Key, 5 /
8
Cable
Accessories
Catalog Model
No. No. Description
59250 A-17-A Adapter with 25
'
x 5 /
16
" Cable
w/Bulb Auger
59255 A-17-B Adapter with 35
'
x 3 /
8
" Cable
w/Bulb Auger
59265 A-17-C Adapter with 35
'
x 3 /
8
" Cable
w/Male Coupling
92095 A-17-D Adapter with 250
'
x 5 /
16
" Cable
w/Bulb Auger
92100 A-17-E Adapter with 250
'
x 5 /
16
" Cable
w/Drop Head
Adapters with Cable
Catalog Model
No. No. Description
62225 C-1 25' (7.6m) w/Bulb Auger
56782 C-1IC 5 /
16
" x 25' (7.6m) Inner Core
w/Bulb Auger
89400 C-21 50' (15.2m) w/Bulb Auger
62235 C-2 25' (7.6m) w/Drop Head Auger
56787 C-2IC 5 /
16
" x 25' (7.6m) Inner Core
w/Drop Head Auger
89405 C-22 50' (15.2m) w/Drop Head Auger
62245 C-4 25' (7.6m) w/Male Coupling
62250 C-5 35' (10.7m) w/Bulb Auger
62260 C-6 35' (10.7m) w/Male Coupling
96037 C-6IC 35' (10.7m) w/Male Coupling
62265 C-7 7 1 /
2
' (2.3m) Tight-Wind
62270 C-8 7 1 /
2
' (2.3m) All-Purpose Wind
51317 C-9 10' (3.0m) Heavy-Duty Wind
Cables
Catalog Model
No. No. Description
62990 T-201 Straight Auger, 5" Long
62995 T-202 Bulb Auger, 1 1 /
8
" O.D.
63000 T-203 Bulb Auger, 7 /
8
", O.D.
55457 T-225 Retrieving Auger
62067 T-201A Straight Flex Auger
63065 T-217 Drop Head, 4" Long
54837 T-204 “C” Cutter, 1"
63005 T-205 “C” Cutter, 1 3 /
8
"
63010 T-206 Funnel Auger, 3" Long
63015 T-207 Spiral Cutter, 1 1 /
4
"
63020 T-208 Spiral Cutter, 1 1 /
2
"
63025 T-209 Spiral Cutter, 2"
63030 T-210 Grease Cutter, 1"
63035 T-211 Grease Cutter, 1 3 /
8
"
63040 T-212 Grease Cutter, 1 3 /
4
"
63045 T-213 4-Blade Cutter, 1"
63050 T-214 4-Blade Cutter, 1 3 /
8
"
63055 T-215 4-Blade Cutter, 1 3 /
4
"
63060 T-216 Chain Knocker, 2"
63280 T-218 Flue Brush, 3"
63070 T-219 Flue Brush, 2 1 /
2
"
63080 T-220 Flue Brush, 2"
63220 T-221 Flue Brush, 1 1 /
2
"
52812 T-230 H-D “C” Cutter, 2"
52817 T-231 H-D “C” Cutter, 2 1 /
2
"
52822 T-232 H-D “C” Cutter, 3"
48482 T-250 Tool Set includes:
– T-203
– T-217
– T-205 – A-13
– T-210
Tools for C-4, C-6, C-7, C-8, and C-9
WARNING
www. .com
information@itm.com 1.800.561.8187