background image

8 - English

WARNING:

If any parts are damaged or missing do not operate 
this product until the parts are replaced. Use of 
this product with damaged or missing parts could 
result in serious personal injury.

WARNING:

Do not attempt to modify this product or create 
accessories not recommended for use with this 
product. Any such alteration or modification is 
misuse and could result in a hazardous condition 
leading to possible serious personal injury.

WARNING:

Do not connect to power supply until assembly 
is complete. Failure to comply could result in  
accidental starting and possible serious personal 
injury.

WARNING:

Do not use any attachments or accessories 
not recommended by the manufacturer of this 
tool. The use of attachments or accessories not 
recommended can result in serious personal injury.

WARNING:

To avoid possible serious injury, keep hands and 
fingers away from the area between the gear 
housing and saw blade clamp.

UNPACKING

This product has been shipped completely assembled.

  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

WARNING: 

Do not use this product if it is not completely 
assembled or if any parts appear to be missing 
or damaged. Use of a product that is not properly 
and completely assembled could result in serious 
personal injury.

  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.

  If any parts are damaged or missing, please call  

1-866-539-1710 for assistance.

PACKING LIST

Jig Saw
T-Shank Blades (1 - wood, 1 - metal)
Hex Key
Tool Bag
Operator’s Manual

ASSEMBLY

WARNING:

Do not allow familiarity with this product to make 
you careless. Remember that a careless  fraction 
of a second is sufficient to inflict severe injury.

WARNING:

Always wear eye protection with side shields 
marked to comply with ANSI Z87.1. Failure to do 
so could result in objects being thrown into your 
eyes resulting in possible serious injury.

OPERATION

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание 39143















Отзывы: