Ridge S-14-100-375UT, Инструкция по установке и эксплуатации

Страница: 9 / 12

Security Brands, Inc. Page 9
TROUBLESHOOTING
Problem Solution
When I enter 1251 on the keypad, the gate will
not open.
1251 is the MASTER CODE. It will not open the
gate unless the unit is in sleep mode. Program
an access code into the unit using Sub-Mode 1
(see PROGRAMMING section of this manual).
The keypad does not respond.
Verify 9-volt battery is good.
Contact Security Brands.
When I enter a valid access code, the gate
does not open.
Check programming, and verify you are using
a valid four-digit access code.
Contact Security Brands.
When I press 1251 on the keypad, nothing
happens, and I hear an endless set of beeps.
Contact Security Brands.
I want to reset my keypad, but when I push
the RESET button nothing happens.
Consult instructions regarding MASTER and
UNIT reset for proper reset sequence.