Thank you for your purchasing. Please follow the
installation instruction to upgrade.
(Warranty void if you do not upgrade by the instruction.)
Original model
A.
Tweezers
B.
T7 star key wrench
Tools required
For the installation of your new RD5 Oversized pulley Wheel
System for Sram (henceforth referred to as OSPW System)
you will need the following tools:
B
A
1
2
A
B
4
A
F
B
C
D
E
The exploded view is as below
D:
Tenon
E:
Extension spring
F:
Original cage
C:
Triangle plate
B:
Torx screw
A:
Rear derailleur body
Use T7 star key wrench to remove
rear triangular plate of rear derailleur
cage.
PS.
A:
T7 Star key wrench
B:
Triangle plate
Use sharp tweezers or other tools
to take out the tenon.Please be
careful to avoid the tenon jumping.
3
PS.
Beware of tenon jumping
Tenon
Assemble the tenon. Please hold the cage when assembling
the tenon.
9
Prepare whole set of RIDEA rear
derailleur cage to be assembled.
6
A:
First, fix RIDEA RD5 rear
derailleur cage into the body.
Please do not press to the end,
and reserve the space for
rotating.
7
A
8
Please fix and rotate the limit screw
in front of the stopper, and hold the
derailleur body and plate tightly.
PS.
A:
Limit screw
B:
Stopper
A
B
5
Warning: Please fix the spring
PS.
A:
Extension spring
A
