Attach FlexLoc to
wheelchair back canes
1. Loosen width adjustment set screws
(A) and pivot screws (B) so that the
FlexLoc hardware can be adjusted in
width to match wheelchair width.
2. Swing clamp hinge (C) around
back cane.
3. Swing clamping screw (D) into clamp
hinge and gently tighten with 4mm allen
wrench.
NOTE: The Decaf hardware comes
preassembled with the correct clamping
screw for 7/8" and 1" diameter tubing.
If clamping to ¾" tubing, replace screws
with shorter screws included with the
hardware.
4. Repeat steps 2 and 3 on opposite side of wheelchair.
3
A
B
C
D
Figure 1
Figure 2
Figure 3
Figure 4
