2
wheelchair to help increase stability. Similarly, a more forward back position
might reduce the forward stability of the wheelchair, increasing risk of tipping
forward, with potential for injury.
WARNING: Do not use your Decaf Back without the foam insert and cover in
place.
WARNING: Failure to properly place and secure the Decaf Back to your
wheelchair might result in serious injury.
WARNING: Failure to accurately assess and adjust the fit of the Decaf Back might
result in serious injury.
CAUTION: Do not lift the wheelchair by the Decaf Back.
I. Tools and Hardware
The Decaf Back comes fully assembled and ready to install. The tools you need to
install and adjust the Decaf Back are included in the package:
• one 4mm Allen wrench
• one 2.5mm Allen wrench
A plastic bag with two screws also comes packed with the Decaf Back. They are
needed only when installing the Decaf Back on wheelchairs with ¾ inch diameter
back canes.
II. Installing Mounting Hardware
At right is a Ride Decaf Back properly
installed on wheelchair back canes
with FlexLoc hardware.
NOTE: This picture depicts a typical
installation of the standard fixed mount
(non-removable) Decaf Back onto a
wheelchair with conventional back
canes. A quick release option, as
shown below, is available for an
upcharge through Ride Designs.
A variety of alternatives to this
configuration are possible. Contact
Ride Designs toll-free at 866.781.1633
to explore solutions to your unique
interface challenge.
