5.2 Electrical material
A minimum conductor diameter of
1.5 mm²
is applicable to the cables in the wiring diagrams. For
the used components, electrical material and cable lengths the necessary conductor diameter can
be different.
5.3 Protection - Conditions and starting points
The conditions that follow are applicable to the wiring diagrams.
•
The installer makes sure that necessary and not shown protections are used and included in the
wiring diagrams.
•
Make sure that you can see the operated system from all control units and control systems. Put
control units and control systems at a height that agrees with applicable standards and guidelines.
•
Protect the electric connections from moist conditions.
•
Obey the applicable standards, guidelines and/or wiring guidelines for electrical connections.
Induction
Problems with induction must be prevented. Induction can cause an interference with the
electronics.
Induction can have many causes such as:
•
Cable lengths
•
External sources
• Too many cables together.
EMC Interference
Problems with electromagnetic interference must be prevented. For a correct functional operation
possibly precautions, such as an EMC mains-filter, are necessary.
Use only applicable components and electrical material.
Always refer to the related information and manuals.
Electrical connections are only permitted to an electrical installer or
an electrician.
For installation and maintenance work the system must be de-
energized.
Always make sure that the protections comply with the, local or
national, laws and regulations of the country.
Separation of cables is necessary. This prevents problems with
induction.
It is necessary to obey EMC-conformity. This prevents problems with
electromagnetic interference.
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
14
Содержание SynCore RW Unit
Страница 28: ......
