The following table provides an overview of the main specifications of the FertiMiX
Pro C basic configuration(s):
Component
Specifications
*
Nominal capacity at 4 bars
15 to 90 [m
3
/h]
Dimensions of frame (W x H x D)
120 x 160 x 120 [cm] smallest
280 x 160 x 200 [cm] largest
Dimensions of main cabinet (W x H x D)
60 x 140 x 30 [cm]
Mixing tank volume
250 to 1000 [L]
Electrical voltages and frequencies
3 x 400 [V], 50 [Hz], with neutral and
earth
3 x 400 [V], 60 [Hz], with neutral and
earth
3 x 230 [V], 50 [Hz], with earth
3 x 230 [V], 60 [Hz], with earth
3 x 440 [V], 60 [Hz], with earth
3 x 480 [V], 60 [Hz], with earth
3 x 600 [V], 60 [Hz], with earth
Power consumption
Depends mainly on the type(s) of pump
(s)
Process controller
CX500
User interface on the FertiMiX
(standalone)
No.
2.3.2
Filling module
The filling module is located directly after the connection point of the fresh water
supply.
If the water in the mixing tank rises too high, the float sends a signal to the shut-off
valve to shut off the water supply. You can also use the knob on the shut-off valve to
control the water supply to the mixing tank manually.
*
Dependent on the configuration selected.
FertiMiX
12
