Ridder 507501, Руководство по эксплуатации продукта

Страница: 20 / 28

Ridder Drive Systems T
+31 (0)341 416 854
F
+31 (0)341 416 611
I
www.ridder.com
20
The following conditions apply to erasing an emergency position:
● Emergency position C must have been programmed (see §6.2).
6.4 Teaching in the LogicDrive RLD200 - Erasing an emergency position
u
Description Picture
1
Set the DIP switch S1 to ‘Teach-in mode’.
Depending on the situation, ‘LED A’ and ‘LED B’ will blink
according to a certain blink code (see §8.1).
2
To erase emergency position C, press the programming
button ‘PROG’ (①). Release the button once both LEDs
(i.e. ‘LED A’ and ‘LED B’) turn off briefly, one after the
other (②).
Remarks:
● Emergency position C can be erased while in any
position!
3
The emergency position has now been erased.
If desired, re-program the emergency position (see §6.2, from point 2). If you do not wish to
program a new emergency position, proceed with step 4.
4
Set the DIP switch S1 to ‘Operating mode’.
5 The emergency position has now been erased.