Ricoma Quick Start Guide
16
4.3.1 Press “Online” and you will see the screen below:
4.3.2 Press “Menu” and you will see the screen below:
The cutter can read the U-disk directly. You can copy the design that you want to cut from the U-disc
and then put it into the cutter’s U-disc port. The cutter will then show the files inside the U-disc. Press
the button first to scan the files, then press Up or Down to review the file.
Find the right plt format file. Then press to confirm it. Then set the number of repeats and the
distance between the pieces you are cutting. Press again and the camera will scan the marks
and start to cut.
Press Left and Right to change the value of X to make the carriage head move.
Press Up and Down to change the value of Y to make the cutting material move.
