41
Soleil-PJ1Training
Slide 41
Adjustments Required after Replacement
The above table shows which adjustments are needed after
replacing the Main Board or Optics Engine.
The adjustments are in the service manual.
Sub Contrast is already adjusted in factory.
No
No
No
Operation Panel Board
Yes
Yes
Keystone
Yes
No
Optical Engine
Yes
No
Main Board
Color Wheel Index Delay
Sub Contrast
Keystone
When you project an image onto a surface at an angle (because the
projector is not quite centered on the screen), the image will be larger at the
top than at the bottom (in the case when the projector is on a table pointing
up at the screen).
Modern projectors correct for this digitally, but calibration is needed.
Sub-contrast
Inputs from both computer interfaces must be calibrated.
VCOM, Gamma, Shading
These require the DPJ Adjustment Tool.
