3
58
Tak
ing P
ic
tur
es
Memo ---------------------------------------------------------------------------------------------------------
• The focus setting and exposure value are fixed during continuous shooting.
• The maximum number of images that can be taken continuously varies depending on the [Recorded
Pixels] setting in the
A
menu.
• The continuous shooting setting is reset when the camera is turned off and on again.
• If you release
z
early for [M-Cont], the number of saved images may not reach 16 or 25.
• The images taken with [M-Cont] or [S-Cont] are displayed in 16 or 25 thumbnails in the single image
display of
C
mode. Press
4
(T) to display an image in the single image display, and
cd
to
display the previous or next image.
Shooting Using the Remote Control Unit
You can perform shooting using the optional remote control unit.
1
Press
w
(
a
) in the shooting mode.
The [Drive Mode] screen appears.
2
Use
ab
to select a setting.
0-sec Remote Control
Releases the shutter immediately after the shutter release button on the
remote control unit is pressed.
3-sec Remote Control
Releases the shutter about 3 seconds after the shutter release button on the
remote control unit is pressed.
3
Press
e
.
The shooting screen reappears.
4
Point the remote control unit towards the remote control
receiver of the camera, and press the shutter release button.
Memo ---------------------------------------------------------------------------------------------------------
• The maximum operating distance of the remote control unit is about 4 m from the front of the camera
and about 2 m from the rear of the camera.
