Ricoh SR4110 Скачать руководство пользователя

Страница: 19 / 60

1.Detailed Descriptions

Junction Gate (right)

JG Left

JG Right

3rd Transport Path

2nd Transport Path

Staple Tray Jogger

Stacking

Paper is sent to the staple tray by the alignment brush roller.

•

For paper of sizes which can go into the pre-stack tray (A4 SEF, B5 SEF, LT SEF): The top fence moves

down and presses the leading edge of the paper to straighten the leading edge of the paper. When more

than 50 sheets of paper are sent to the staple tray, the positioning roller presses the paper to prevent the

paper from falling down.

•

For paper of sizes which cannot go into the pre-stack tray: After the stapler tray entrance sensor turns off

(A4 size paper: 55 to 65 ms after the trailing edge of the copy passes the stapler tray entrance sensor),

the positioning roller motor is energized to push the positioning roller into contact with the paper. Then

the positioning roller rotates to push the paper back and align the trailing edge of the paper against the

stack stopper. The alignment brush roller guides paper to the stack stopper.

Jogging

Stacking straightens the rear edge of paper. Then jogging straightens the sides of the paper. At the start of a

copy job, the jogger fences move 7.2mm from the width of paper and wait. When the rear edge of the paper

passes the stapler entrance sensor, the jogger fence moves 3.7mm inward while stacking straightens the rear

edges of the stack. Then the jogger fences move another 3.5mm inward to straighten the side edges. When

jogging is completed, the jogger fences wait 7.2mm away from the width of the paper until the next

operation.

•

A plate spring extends from the front and the rear edges to improve the straightening mechanism.

Paper Holding

Содержание SR4110





























































Результаты поиска

Содержание SR4110

Отзывы:

Похожие инструкции для SR4110

Бренды по названию

Популярные бренды

Ricoh SR4110, Руководство по обслуживанию на месте

Результаты поиска

Содержание SR4110

Отзывы:

Похожие инструкции для SR4110

Бренды по названию

Популярные бренды