Ricoh Savin SLP6C, Руководство по эксплуатации

Страница: 43 / 140

Loading Paper
31
3
E
When the third digit is the value
you want, press
{{{{
#Enter
}}}}
to move
the
llll
pointer to the second digit.
<Custom>
l
jl
/# Width 110mm
Note
❒
You can press
{
Escape
}
to move
the pointer to the left.
F
Press
{{{{U U U U}}}}
or
{{{{T T T T}}}}
to change the
second (center) digit of the paper
width.
<Custom>
l
jl
/# Width 120mm
G
Repeat steps
EEEE
and
FFFF
to set the val-
ue of the first (rightmost) digit of
the width.
H
While the pointer is located at the
first (rightm ost) digit of the
width, press
{{{{
#Enter
}}}}
to advance
to the length setting display.
<Custom>
l
jl
/# Length297mm
I
Use the same procedure as that for
the width to set the three digits of
the length. Move the
llll
pointer to
the left with
{{{{
Escape
}}}}
and to the
right with
{{{{
#Enter
}}}}
. Press
{{{{U U U U}}}}
and
{{{{T T T T}}}}
to change the digit where the
pointer is located.
J
While the
llll
pointer is located at
the first (rightmost) digit of the
length, press
{{{{
#Enter
}}}}
.
The “Media” menu appears.
K
Press
{{{{
On Line
}}}}
.
The normal display screen ap-
pears.
Note
❒
To change from the “Custom”
size setting to automatic paper
size detection, press
{U
U U
U}
and
{T T T T}
in step
C
of the above pro-
cedure to scroll to “Auto De-
tect”, and then press
{
#Enter
}
.
Loading Paper in the PAPER
FEED UNIT Type206
Important
❒
The paper tray cannot be pulled
out completely from the paper
feed unit. Do not try to pull it out
forcibly.
Note
❒
For more information about the
size and feed direction of paper
that can be loaded in the paper
feed unit, see P.21
“Paper and Other
Media Supported by This Printer” .
A
Slide the paper tray out until it
stops.
ZDGY050J