Ricoh RDC-I700, Руководство по эксплуатации

Страница: 101 / 186

99
5
Using JOB Navi. Image Capture Guide List
In the case of Excel, you should specify the range of cells for image names,
write it out as a Guide List and save it in the Template folder for the CF (or PC)
card. All that remains then is to insert the card into the camera. There is also a
function for sending the images one at a time recorded in accordance with the
Guide List, so you can easily create a table including photographs.
In the case of Word, you input the image titles in the layout frame, write them
out as the Guide List and save it in the Template folder for the CF (or PC) card.
All that remains then is to insert the card into the camera. Send the images one
at a time in accordance with the Guide List, so you can easily create a table
including photographs.
Note
• You cannot transfer the Guide List file directly from inside Excel or
Word application to the camera connected to a PC or cannot import
the images from the camera to Excel or Word application.
This section therefore gives an explanation as a precondition that you
are using the type of PC to which you can connect or insert a CF or
PC card.
When you do not have that type of PC, save the Guide List file in a PC
hard disk and transfer it to the camera by using the Microsoft Explorer
with the RDC-i700 Explorer Plug-In installed.
When you import the images pasted in the Guide List to the camera,
transfer them from the camera to a PC first.
■
How to Use the Browser
You can open the camera top page from the browser and create and edit the
Guide Lists on the browser.
■
How to Use the Camera Independently
You can create and edit Guide Lists independently on the camera. Use this
method when you want to change a Guide List while you are out.
Using the Guide List
A detailed explanation of how to create a Guide List and how to take images
according to the list is given in the following pages.
As this function is not available to Macintosh users, they should proceed to
P.110.