Ricoh RB5020 Скачать руководство пользователя страница 7

Страница: 7 / 109

Terms

Meaning

PFU

Paper Feed Unit (Tray 1, Tray 2, Tray 3)

PTB

Paper Transport Belt (between PTR and fusing unit)

PTR

Paper Transfer Roller

Ring Binder RB5020 (D737)

TCRU

Trained Customer Replacement Units

Trailing Edge

TM/P

ID sensor. "ID sensor" is used in this manual. However, you may see "TM/P" in the SP
codes on the operation panel.

TPU

Transit Path Unit for Perfect Binder Type S1 (D736)*

TRM

Trimmer Unit 5040 (D520)*

VTU

Vertical Transport Unit

Optional peripheral devices.

Trademarks

• Microsoft

, and Windows

are registered trademarks of Microsoft Corporation in the United

States and /or other countries.

• PostScript

is a registered trademark of Adobe Systems, Incorporated.

• PCL

is a registered trademark of Hewlett-Packard Company.

• Ethernet

is a registered trademark of Xerox Corporation.

• PowerPC

is a registered trademark of International Business Machines Corporation.

• Other product names used herein are for identification purposes only and may be trademarks of

their respective companies. We disclaim any and all rights involved with those marks.

Содержание RB5020














































































































Результаты поиска

Содержание RB5020

Отзывы:

Ricoh RB5020, Руководство по обслуживанию, Страница: 7 / 109

Результаты поиска

Содержание RB5020

Отзывы: