Ricoh Pro L4130, Руководство для печати

Страница: 1 / 8

RICOH Pro L4130/L4160 Print Guide
Thank you for purchasing our printer cutter RICOH Pro L4130/L4160.
This “Print Guide” explains the printing method using RICOH Pro L4130/L4160 and the attached software RIP
[RICOH Software RIP] and items to be checked/set before printing.
First, confirm the following items:
Before printing, the preparation for RICOH Pro L4130/L4160 and the software RIP [RICOH Software RIP] is
required.
First, prepare the followings:
About system configuration (Refer to P. 2)
The explanation of the system configuration to print is described.
Prepare RICOH Pro L4130/L4160 (Refer to P. 3)
To use RICOH Pro L4130/L4160, the items below are explained:
 Connect the PC in which the software [RICOH Software RIP] has been installed with
RICOH Pro L4130/L4160.
 Turn on the power supply.
 Depending on the media to be set, adjust the print head height etc.
 Set the media.
 Perform test printing to check whether there is no nozzle clogging etc.
 Correct the feeding rate of media.
 Correct the ink drop position.
Prepare the RICOH Software RIP (Refer to P. 4)
The preparation of the software [RICOH Software RIP] is explained.
For the installation method, refer to the manual of the RICOH Software RIP.
The printing method using a sample is
explained.
Here, the printing method using a sample image included in the attached CD.
Perform printing (Refer to P. 5)
Some typical questions are described.
Typical questions (Refer to P. 7)