manualshive.com logo in svg

Ricoh Pro C7100, Руководство по эксплуатации

Поделиться
Скачать
Ricoh Pro C7100 Скачать руководство пользователя страница 93

Loading Paper into the Interposer

• Do not place anything on top of or leave documents on the sensor. This may lead to the paper size

not being correctly scanned or paper jams.

1.

While pressing the release lever, align the side fences with the paper size to be loaded.

DER099

2.

Load paper orderly.

Do not stack paper over the limit mark.
Align the side fences gently against the paper you loaded, if necessary.

DER100

1

1. Paper extender

• Load paper with its printed side up (the front side). If you are using the booklet finisher, load sheets

print side down.

• Load paper in the interposer in the same orientation as paper in the paper tray.
• The staple position or punch hole position will be on the left side of the paper, when you are facing

the machine.

• When loading paper larger than A4 (8

1

/

2

 × 11) , pull out the paper extender.

Loading Paper

91

Содержание Pro C7100





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды