Ricoh Pro C7100 Скачать руководство пользователя страница 171

Страница: 171 / 212

DER110

1. Rear: 80 cm (31.5 inches) or more

2. Right: 100 cm (39.4 inches) or more

3. Front: 100 cm (39.4 inches) or more

4. Left: 100 cm (39.4 inches) or more

• For the required space when options are installed, contact your service representative.

Power connection

• Do not use any power sources other than those that match the specifications shown. Doing so

could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications shown. Doing so could

result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords

that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with other appliances.

Doing so could result in fire or electric shock.

Where to Put Your Machine

169

Содержание Pro C7100





















































































































































































































Результаты поиска

Содержание Pro C7100

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Pro C7100, Руководство по эксплуатации

Результаты поиска

Содержание Pro C7100

Отзывы:

Бренды по названию

Популярные бренды