Ricoh Priport JP8000 Скачать руководство пользователя страница 267

Страница: 267 / 464

Standard Printing

Standard Printing

AAAA

Make sure that the machine is
ready for printing.

BBBB

If user codes are turned on, enter
your user code with the number
keys, and then press the

{{{{

}}}}

key.

Reference

See p.18 “Entering a User Code
to Use the Machine”.

CCCC

Make sure that there are no previ-
ous settings remaining.

Note

❒

To clear any previous settings,
press the

{{{{

Clear Modes/Energy

Saver

}}}}

key.

DDDD

Lift the exposure glass cover.

Note

❒

Be sure to lift the exposure glass
cover more than 30cm, 12".

EEEE

Place the original face down on
the exposure glass. The original
should be aligned with the refer-
ence mark and the left corner
scale.

1. Left corner scale
2. Reference mark

FFFF

Lower the exposure glass cover.

GGGG

Make your desired settings.

HHHH

Press the

{{{{

Start

}}}}

key.

A trial print is delivered to the pa-
per delivery tray.

TPEH010E

Содержание Priport JP8000

















































































































































































































































































































































































































































































Результаты поиска

Содержание Priport JP8000

Отзывы:

Ricoh Priport JP8000, Руководство по эксплуатации, Страница: 267 / 464

Результаты поиска

Содержание Priport JP8000

Отзывы: