64
Sho
oti
ng F
un
ction
s
3
Flash Mode
1
Remove the hot shoe cover
of the camera.
2
Attach the flash and turn on the camera.
Caution
• Do not use high-voltage or high-current external flashes. They may
cause the camera to malfunction.
• A flash with reversed polarity (the center of the hot shoe or sync
plug has a negative symbol) cannot be used, as this may damage
the camera or flash.
• Linked functions do not work.
• To prevent vignetting caused by Trailing Curtain Sync from
occurring, it is recommended to take a test shot using a shutter
speed one stop slower than the flash sync speed.
You can connect a sync cord
to the sync socket on the camera.
Memo
• The flash connected to the sync socket can be discharged in
Modeling Flash or Test Flash mode by pressing
8
. The setting can
be changed with [Illumination Button] in [Button Customization]
of the
A
4 menu. (
w
p.R20)
Caution
• The contact of the sync socket is not dust-proof or water-resistant.
Attach the provided Sync socket 2P cap when not in use.
Attaching a Flash
Using a Sync Cord
Sync socket
Sync socket 2P cap
e_kb547_ENG.book Page 64 Thursday, May 15, 2014 9:35 AM
Содержание Pentax 645Z
