Ricoh MP C305SPF, Руководство по обслуживанию на месте, Страница: 70 / 146

7
Priority given to various types of
remote terminal ID when printing
reports
0: RTI > CSI > Dial label > Tel.
number
1: Dial label > Tel. number > RTI >
CSI
This bit determines which set of priorities the machine
uses when listing remote terminal names on reports.
Dial Label: The name stored, by the user, for the
Quick/Speed Dial number.
System Switch 0A (SP No. 1-101-011)
No Function Comments
0
Automatic port selection
0: Disabled, 1: Enabled
When "1" is selected, a suitable port is automatically
selected if the selected port is not used.
NOTE: This bit is useful if all communication lines at a
customer site are not same quality.
1-3 Not used Do not change these settings.
4
Dialing on the ten-key pad when the
external telephone is off-hook
0: Disabled 1: Enabled
0: Prevents dialing from the ten-key pad while the
external telephone is off-hook. Use this setting when
the external telephone is not by the machine, or if a
wireless telephone is connected as an external
telephone.
1: The user can dial on the machine's ten-key pad
when the handset is off-hook.
5
On hook dial
0: Disabled 1: Enabled
0: On hook dial is disabled.
6-7 Not used Do not change the factory settings
System Switch 0B - Not used (Do not change the factory settings.)
System Switch 0C - Not used (Do not change the factory settings.)
System Switch 0D - Not used (Do not change the factory settings.)
System Switch 0E (SP No. 1-101-015)
No Function Comments
4. Service Tables
68