manualshive.com logo in svg

Ricoh MP C305SPF, Руководство по обслуживанию на месте, Страница: 49 / 146

Поделиться
Скачать
Ricoh MP C305SPF Скачать руководство пользователя страница 49

Communication

Route

Item

Action [Remarks]

Between machine
and e-mail server

1. LAN settings in the
machine

• Check the LAN parameters
• Check if there is an IP address conflict with

other PCs.

[Use the "Network" function in the User Tools.
If there is an IP address conflict, inform the
administrator.]

2. E-mail account on
the server

• Make sure that the machine can log into the e-

mail server.

• Check that the account and password stored in

the server are the same as in the machine.

[Ask the administrator to check.]

3. E-mail server

• Make sure that the client devices which have

an account in the server can send/receive e-
mail.

[Ask the administrator to check.
Send a test e-mail with the machine’s own number
as the destination. The machine receives the
returned e-mail if the communication is performed
successfully.]

IFAX Troubleshooting

47

Содержание MP C305SPF



















































































































































Отзывы:

Нет отзывов