Ricoh MP 7040A series, Руководство пользователя

Страница: 9 / 31

2
MP 7040A Series
1. System environment
This unit can be operated in the system environment explained here.
CPU 100 MHz (or faster) Pentium (for 4x speed,
166MHz or faster recommended)
Memory Windows 98/95: 32MB or greator.
Windows NT Workstation Ver. 4.0: 32MB or
greator (64MB or over recommended)
Harddisk Hard disk with average access time of
19msec or less, and data transfer speed of
1,200KB/sec or greater. 75MB or more free
space.(The free space needed for writing de-
pends on the quantity of data.)
Interface Enhanced-IDE interface (as Primary Slave,
Secondary Master, or Slave)
Drive bay 5.25-inch half height bay required
Power +5V/+12V power socket required
Sofyware Required OS Windows 98/95, Windows NT Workstation Ver.
4.0 (Service Pack 3) or later
*
1
CD-R, CD-RW discs Ricoh, Kao, Mitsubishi Chamical, Taiyo Yuden,
Mitsui Toatsu, TDK or Kodak discs are rec-
ommend.
†
Occasionally the CD-R and CD-RW discs written by the CD-R/RW drive
cannot be read by other CD drives*
2
. These unreadable discs should be
read using the CD-R/RW drive.
*
1
With Windows NT Workstation Ver. 4.0, only usable with Adaptec

E
ASY
CD C
REATOR

.
*
2
The disc written using the CD-R/RW drive might not be readable by CD-
ROMs other than Multi-read compatible (Random UDF compatible) CD-
ROMs.
Multiread compatible (Random UDF compatible) CD-ROMs are:
‘
CD-ROMs that can read low reflectance
’
CD-ROMs that support Packet Write.
System
requirements