Ricoh M281 Series Скачать руководство пользователя страница 992

Страница: 992 / 1003

Fax Communication Features

D255/D256 FAX OPTION

158

the IFAX issues an error to the SMTP server and outputs an error report.

Auth. E-mail RX

In order to limit access to mail delivery with IFAX, the addresses of senders must be limited using

the Access Limit Entry. Only one entry can be registered.

1. Access Limit Entry

For example, to limit access to @IFAX.ricoh.co.jp:

[email protected]

Matches and is delivered.

[email protected]

Does not match and is not delivered.

[email protected]

Does not match and is not delivered.

2. Conditions



The length of the Access Limit Entry is limited to 127 characters.



If the Access Limit Entry address and the mail address of the incoming mail do not match,

the incoming mail is discarded and not delivered, and the SMTP server responds with an

error. However, in this case an error report is not output.



If the Access Limit Entry address is not registered, and if the incoming mail specifies a

delivery destination, then the mail is delivered unconditionally.

Handling Mail Reception Errors

Abnormal files

When an error of this type occurs, the machine stops receiving and commands the server to erase

the message. Then the machine prints an error report and sends information about the error by

e-mail to the sender address (specified in the "From" or "Reply-to" field of the message). If there is

an incomplete received message in the machine memory, it will be erased.

The machine prints an error message when it fails to send the receive error notification after a

certain number of attempts.

The following types of files are judged to be abnormal if one or more of the following are detected:

1. Unsupported MIME headers.

Supported types of MIME header

Header

Supported Types

Content-Type

Multipart/mixed, text/plain, message/rfc822 Image/tiff

Charset

US-ASCII, ISO 8859 X. Other types cannot be

handled, and some garbage may appear in the data.

Содержание M281 Series












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание M281 Series

Отзывы:

Похожие инструкции для M281 Series

Бренды по названию

Популярные бренды

Ricoh M281 Series, Руководство по обслуживанию

Результаты поиска

Содержание M281 Series

Отзывы:

Похожие инструкции для M281 Series

Бренды по названию

Популярные бренды