Ricoh LF110, Руководство по обслуживанию

Страница: 38 / 94

10 October, 2002 PRINT QUALITY
4-3
Trouble-
shooting
Error Message Description Solution
POLLING ERROR
The remote fax machine you want
to poll is not ready to respond to
your poll. Or when setting up to poll
another fax machine, you have
used an incorrect poll code. The remote operator should
know in advance that you are
polling and have their fax unit
loaded with the original
document.
Enter the correct poll code.
POWER FAILURE
A power failure has occurred. If documents have been stored
in the memory, a “Power Failure
Report” will be automatically
printed when the power is
restored.
RECEIVE ERROR
A fax has not been received
successfully. A problem with the facsimile
communications has occurred.
Ask the sender to try again.
RETRY REDIAL ?
The machine is waiting for a
specified time interval to redial a
previously busy station. You can press Start/Enter to
immediately redial, or Stop to
cancel the redial operation.
SEND ERROR
Your fax has not gone through
successfully. A problem with the facsimile
communications has occurred.
Try again.
TONER EMPTY
The toner cartridge has run out.
The machine stops. Replace with a new toner
cartridge.
TONER LOW
The toner is almost empty. Take out the toner cartridge and
gently shake it. By doing this,
you can temporarily re-establish
the print quality.
WARMING UP
The printer is warming up and is
off-line. Wait until the printer is on-line.
4.3 PRINT QUALITY
No. Roller
Abnormal image
period
Kind of abnormal image
1 OPC Drum 75.4 mm
•
White spot on black image
•
Black spot
2 Charge Roller 37.7 mm Black spot
3 Supply Roller 26.8 mm Horizontal density band
4 Develop Roller 31.6 mm Horizontal density band
5 Transfer Roller 47.1 mm
Black side contamination/
transfer fault
6 Heat Roller 50.1 mm Black spot, White spot
7 Pressure Roller 50.2 mm Black side contamination