manualshive.com logo in svg

Ricoh LD520CL, Руководство по эксплуатации

Поделиться
Скачать
Ricoh LD520CL Скачать руководство пользователя страница 834

Message List

This is a list of messages that appear in the machine's system log. The system log can be viewed using the
“syslog” command.

System Log Information

Use the following command to display the system log information:

• telnet: Use the “syslog” command.

Message

Problem and solutions

Access to NetWare server <file server name>
denied. Either there is no account for this print server
on the NetWare server on password was incorrect.

Login to the file server failed when the print server
is active. Make sure that the print server is registered
on <file server name>. If a password is specified for
the print server, delete the password.

account is unavailable:
same account name be used.

User account is disabled. This could be because it
use the same account name as the administrator
account.

account is unavailable:
The authentication password is not set up.

User account is disabled. This could be because the
authentication password is not set, and only the
encryption account is set.

account is unavailable:
encryption is impossible.

Encryption is not possible and account is disabled.
This could be because:

• Security option is not installed.
• Encryption password has not been specified.

add_sess_IPv4: bad trap addr: <IPv4 address>,
community: <community name>

The IPv4 address (0.0.0.0.) is unavailable when the
community access type is TRAP. Specify the host
IPv4 address for the TRAP destination.

add_sess_IPv6: bad trap addr: <IPv6 address>,
community: <community name>

The IPv6 address [::] is unavailable when the
community access type is TRAP. Specify the host
IPv6 address for the TRAP destination.

add_sess_IPv4: community <community name>
already defined.

The same community name already exists. Use
another community name.

add_sess_IPv6: community <community name>
already defined.

The same community name already exists. Use
another community name.

4. Monitoring and Configuring the Printer

164

4

Содержание LD520CL





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды