Ricoh LD425, Руководство по общим настройкам, Страница: 156 / 324

Forwarding
This section describes Forwarding settings.
Print documents received and forward to a specified End Receiver. This is useful if, for example, you are
visiting another office and would like a copy of your documents to be sent to that office.
You can also specify a "folder" as the forwarding destination.
• You can select end receivers only from among destinations programmed in the Address Book.
A fax number, Internet Fax destination, IP-Fax destination, e-mail address, and folder destination can be
set as the forwarding destination.
When you wish to change the end receivers depending on the senders, specify the end receivers by the
senders, at "Program Special Sender". Documents not received from specified senders are sent to the
destination specified in this function.
You can specify whether or not to print forwarded documents. See "Parameter Settings" (switch 11, bit 6).
Deleting a destination specified as a forward destination from the destination list causes the settings of the
forward destination to be deleted, so they must be registered again. When a destination is changed, a
document is transmitted to the new destination. If there is no destination of the specified type, you can set
which destination to be used as an alternative destination. See "Parameter Settings" (switch 32, bit 0).
You can program one of the Quick Operation keys with operations for this function.
If you have specified the e-mail destination or folder destination for forwarding, you can specify the file
format used for forwarding. See "Parameter Settings" (switch 21, bit 3).
• p.125 "General Settings"
• p.159 "Parameter Settings"
• p.169 "Special Senders to Treat Differently"
Programming an End Receiver
This section describes how to program an End Receiver.
• One end receiver can be registered for each special sender. To register two or more end receivers,
use group destination. However, a maximum of 500 destinations can be specified in a group.
1. Press [Facsimile Features].
2. Press [Reception Settings].
3. Press [Forwarding].
4. Facsimile Features
154
4