Ricoh Laser Printers, Сетевое руководство

Страница: 17 / 36

11
4. Windows Configuration
Configuring TCP/IP
This section explains configuring
Windows for TCP/IP and IPP.
Configuring a Windows 98SE /
Me Computer
Follow the procedure below to con-
figure a Windows 98SE / Me compu-
ter to use TCP/IP.
A
Open [ Control Panel ] , and then
double-click the Network icon.
Make sure
[ TCP/IP ] is selected in
the [ The following network compo-
nents are installed ] box on the [ Con-
figuration ] tab.
Note
❒
Select TCP/IP if it is not already
selected.
❒
If TCP/IP is not installed, click
[ Add ] on the [ Configuration ] tab to
install it. For details about in-
stalling TCP/IP, see Windows
98SE / Me Help.
B
Click [ Properties ] .
C
Configure TCP/IP using the ap-
propriate IP address, subnet
mask, and other settings.
Check with the network adminis-
trator that the settings are correct.
Configuring a Windows 2000
Computer
Follow the procedure below to con-
figure a Windows 2000 computer to
use TCP/IP.
A
On the [ Start ] menu, point to [ Set-
tings ] , and then click [ Network and
Dial-up Connections ] .
B
Double-click [ Local Area Connec-
tion ] . On the [ General ] tab, click
[ Properties ] .
C
Make sure [ Internet Protocol (TCP/IP) ]
is selected in the [ Components
checked are used by this connection ]
box on the [ General ] tab.
Note
❒
Select TCP/IP if it is not already
selected.
❒
If TCP/IP is not installed, click
[ Install ] on the [ General ] tab to in-
stall it. For details about install-
ing TCP/IP, see Windows 2000
Help.
D
Click [ Properties ] .
E
Configure TCP/IP using the ap-
propriate IP address, subnet
mask, and other settings.
Check with the network adminis-
trator that the settings are correct.