Ricoh IS760, Руководство по эксплуатации

Страница: 73 / 96

Troubleshooting
69
6
Cannot continue
endorsing due to
the limit.
• The number of figures
exceeded or dipped
from the values set for
the endorser counter.
• The number of the counter has ex-
ceeded the value set in [ Digit: ] under
the [ Endorser ] tab. Check the num-
ber of the originals and set [ Start: ] ,
[ Step: ] , and [ Digit: ] .
• The number of the counter has
reached -1 when you set [ Step: ] un-
der the [ Endorser ] tab to negative
value. Check the number of the
originals and set
[ Start: ] and [ Step: ]
so the number of the counter ends in
higher values than 0.
Cannot add any
more scanning
mode.
• Maximum number of
the scanning modes is
registered.
• You can add a maximum of 100
scanning modes. Delete the modes
that you do not use.
Cannot specify
any more scanning
area.
• Maximum number of
the scanning areas is
registered.
• You can add a maximum of 100
scanning areas. Delete the areas that
you do not use.
Double Feed has
occurred.
Do you want to
continue scan-
ning?
Set the originals
again and press
"Yes" to contin-
ue,
"No" to end.
• Double Feed (More
than 2 sheets of origi-
nal was fed into the
ADF at once) has oc-
curred and was de-
tected.
• To continue scanning, replace the
double fed originals to the ADF and
Click
[ Yes ] . Scanning restarts after
you click
[ Yes ]
.
• To finish scanning, click [ No ] .
• The double feeding is likely to occur
when the changeover switch is not
set correctly to the paper thickness
of the originals. When you scan the
regular thickness originals —origi-
nals thinner than 128g/m
2
(242.5bls)— set the switch on the
back side (regular paper mode).
Cannot rotate the
original.
Lower the resolu-
tion and scan
again.
• Exceeded the maxi-
mum file size for the
rotate function.
• Lower the resolution or the set the
scan area smaller and scan again.
Cannot perform
Combine in the
current resolu-
tion.
Set the resolu-
tion to over n-
dpi and scan
again.
• When combining the
images, the originals
will be scanned with
the lowest resolution
specified for the scan-
ner. The resolution
displayed on the mes-
sage will be the lowest
resolution available
for the combine func-
tion.
• Adjust the resolution to the dis-
played value.
Message Possible Cause Required Action