Ricoh IS760, Руководство по эксплуатации

Страница: 70 / 96

Appendix
66
6
When the Originals are Not Fed Correctly
AAAA
Remove the originals from the ADF.
BBBB
Lift the Pressure Panel or open the ADF cover.
Unusual conditions of the Original Table will be corrected.
CCCC
Shutdown the Pressure Panel or the ADF cover.
Note
❒
When you shut the ADF cover, please confirm the two magnets are fixed
on the magnet catch and the cover is closed tightly.
When Scanning is Not Performed as Expected
Condition Possible Cause and Required Action
The scanned image is dirty. • The Exposure Glass, the ADF Exposure
Glass, Background panel, Feed roller or
Original Roller is dirty.
• Clean the Exposure Glass, the ADF Expo-
sure Glass, Background panel, Feed roller
or Original Roller.
⇒
p.71 “Cleaning”
The originals are damaged when fed to the
ADF. • Set the paper thickness changeover lever
correctly or it may damage originals.
Please confirm the lever and the paper
thickness of the originals. When you scan
the originals thicker than 128g/m
2
(242.5bls), turn the changeover lever on
your side (thick paper mode).
Image is distorted or out of position. • The original was moved while scanning.
Do not move the original while scanning.
• The original was not pressed flat against
the exposure glass. Make sure that the orig-
inal is pressed flat against the exposure
glass.
ADC048S