Ricoh IS450, Руководство по эксплуатации, Страница: 19 / 74

5
Understanding the Indicators
The scanner has the following indicators:
TH2H030E
1: Power On
2: Machine Busy
3: Document in Place
4: Error
When the scanner is in a normal operating state, the indicators will light in one of the combina-
tions shown below. If the indicators light in any other pattern, an error has occurred. Refer to p.
28, “Error Indicators and Solutions.”
Description
❍ ❍ ❍ ❍
When the power has just been turned on, or the
Reset switch has been pressed (This combination
is displayed only for a few seconds.)
❍ ● ● ●
When there is no document in the Auto Docu-
ment Feeder, and no document is being scanned
❍ ● ❍ ●
When there is a document in the Auto Document
Feeder, but the document is not being scanned
❍ ❍ ● ●
When scanned data is being transferred (and there
is no document in the ADF)
❍ ❍ ❍ ●
When scanned data is being transferred (and there
is a document in the ADF)
❍ ● ✕ ●
When the scanner is ready for manual scanning
✕ ● ● ●
When the scanner is ready by Low Power Mode
❍
: On
✕
: Flashing
●
: Off
Guide to the Scanner
1
2
3
4