Ricoh infoprint 1222 Скачать руководство пользователя страница 152

Страница: 152 / 203

Repair Information

4-49

Infoprint 1222

4. Support the left side with the left hand while separating the left

hinge.

Note: In the next step, note a loaded compression spring [A] on the

left side and under the metal plate.

5. Rotate the metal plate until the sensor can be accessed.

6. Disconnect the cable to the sensor and remove the sensor by

pushing on the latches underneath the sensor and housing.

7. Install the new sensor and reconnect the cable.

8. Reinstall the metal plate. Make sure the compression spring is

in the proper location and captured at its ends.

9. Rotate the metal plate to keep the spring positioned. Reconnect

the left hinge and then the right hinge.

Содержание infoprint 1222












































































































































































































Результаты поиска

Содержание infoprint 1222

Отзывы:

Похожие инструкции для infoprint 1222

Бренды по названию

Популярные бренды

Ricoh infoprint 1222, Руководство по обслуживанию

Результаты поиска

Содержание infoprint 1222

Отзывы:

Похожие инструкции для infoprint 1222

Бренды по названию

Популярные бренды