Ricoh infoprint 1222 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 203

background image

Edition: September 2002

The following paragraph does not apply to any country where such provisions are
inconsistent with local law: LEXMARK INTERNATIONAL, INC. PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do
not allow disclaimer of express or implied warranties in certain transactions; therefore,
this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes
are periodically made to the information herein; these changes will be incorporated in
later editions. Improvements or changes in the products or the programs described may
be made at any time.

Comments may be addressed to Lexmark International, Inc., Department D22A/032-2,
740 West New Circle Road, Lexington, Kentucky 40550, U.S.A or e-mail at
[email protected]. Lexmark may use or distribute any of the
information you supply in any way it believes appropriate without incurring any obligation
to you. You can purchase additional copies of publications related to this product by
calling 1-800-553-9727. In other countries, contact your point of purchase.

Lexmark, Lexmark with diamond design, MarkNet, MarkVision, Optra, and Prebate are
trademarks of Lexmark International, Inc., registered in the United States and/or other
countries.

Optra Forms and PictureGrade are trademarks of Lexmark International, Inc.

Other trademarks are the property of their respective owners.

© Copyright Lexmark International, Inc. 2002.
All rights reserved.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the Government is subject to restrictions as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.

Infoprint 1222

U.S.A. P/N 12G9119

1
2
3
...
»

Содержание infoprint 1222












































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для infoprint 1222

Бренд: Malyan Страницы: 9

Бренд: JCM Страницы: 22

Magicolor 2 Desklaser

Бренд: QMS Страницы: 60

Document WorkCentre 480cx

Бренд: Xerox Страницы: 318

Бренд: Xerox Страницы: 76

Бренд: Xerox Страницы: 11

Бренд: Xerox Страницы: 352

Color 560 Printer

Бренд: Xerox Страницы: 2

Бренд: Xerox Страницы: 105

Бренд: Xerox Страницы: 42

Бренд: Xerox Страницы: 13

Бренд: Xerox Страницы: 132

CopyCentre C2128

Бренд: Xerox Страницы: 2

Бренд: Xerox Страницы: 20

Бренд: Xerox Страницы: 34

Бренд: Xerox Страницы: 8

Бренд: Xerox Страницы: 70

Бренд: Xerox Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды