Ricoh GWD2004 Скачать руководство пользователя страница 138

Страница: 138 / 190

Copying

120

Sample Copy

Use this function to check the copy settings before making a long copy run.

Important

❒

This function can be used only when the Sort function is selected.

❒

To use Sample Copy, select

[

Press Start Key

]

under

[

Feed Start Method

]

in System

Settings. You cannot make sample copy when

[

Auto

]

is selected.

Select Sort or Rotate Sort and any other necessary functions, and then place
the originals.

Press the

{

Sample Copy

}

key.

One copy set is delivered as a sample.

If the sample is acceptable, press

[

Continue

]

The number of copies made is the number specified minus one for the proof
copy.

Note

❒

If you press

[

Suspend

]

after checking the results, return to step

to adjust

the copy settings as necessary. Depending on the combination of functions,
you may not be able to change some settings.

Reference

p.155 “Function Compatibility”

ATY055S

Содержание GWD2004































































































































































































Результаты поиска

Содержание GWD2004

Отзывы:

Ricoh GWD2004, Руководство по эксплуатации, Страница: 138 / 190

Результаты поиска

Содержание GWD2004

Отзывы: