Ricoh G104, Руководство по обслуживанию

Страница: 398 / 601

Service Mode Table
G160/G161 5-18 SM
1004 076 PFU: RS: Thin *EGB
optional paper tray unit.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 077 Duplex: LS: Thin *EGB
1004 078 Duplex: RS: Thin *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 079
DEV / OPC [K]: LS:
OHP
*EGB
Adjusts the black development and OPC
motor speed.
[-4.00 to 4.00 / -1.35 / 0.01 %/step]
1004 080 DEV [CMY]: LS: OHP *EGB
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 081 OPC [CMY]: LS: OHP *EGB
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 082 Fusing: LS: OHP *EGB
Adjusts the paper exit and fusing motor
speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 083 T.Belt: LS: OHP *EGB
Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 084 PFU: LS: OHP *EGB
Adjusts the speed of the feed motor in the
optional paper tray unit.
[-4.00 to 4.00 / -1.14 / 0.01%/step]
1004 085 Duplex: LS: OHP *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1006 [Phase Adjust.] Phase Adjustment
1006 001 Angle *EGB
Adjusts the phase angle between the K drum
and the CMY drums.
[-180 to 180 / 0 / 1/step] DFU
1104 [Fusing Cont.] Fusing Control
Control Method *EGB [0 or 1 / 1 / -]
1104 001
Selects the fusing control method.
0: ON/OFF Control, 1: PID Control (Phase control)
Max. Wait Time *EGB [0 to 255 / 30 / 1 sec/step]
1104 022
Adjusts the maximum waiting time for the target printing temperature of fusing
unit. After this interval, printing will start if the temperature did not get to the
target.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA