manualshive.com logo in svg

Ricoh FT 1008, Руководство оператора

Поделиться
Скачать
Ricoh FT 1008 Скачать руководство пользователя страница 21

Environmental conditions greatly affect the performance of a copier. Be

sure to choose your installation location carefully.

Optimum Setting Conditions

Temperature: 10 - 35°C (50 - 95°F)

Humidity: 15 - 80% RH
Place upon a strong, stable, level

base with a flat, even surface. Do

not place on a surface that has
holes, ruts, cavities or is uneven
in any way.
The copier must be level within
3mm (0.11 in.) both front to rear
and left to right.
To avoid a possible ozone
buildup, be sure to locate this
copier in a large well ventilated
room with an air turnover of
more than 3 times/hr/person.

Locations to Avoid

Locations exposed to direct
sunlight or strong light (more
than 2,000 lux).
Locations directly exposed to
cool air from an air conditioner

or heated air from a heater.
(Sudden temperature changes
may cause condensation within
the copier.)
Places where the copier might be
subjected to frequent strong

vibration.
Dusty areas.
Areas exposed to corrosive
gases.
Places higher than 2 , 0 0 0 m  (6,500
ft.) above sea level.

Copier Location

 

 

Place the copier near the wall outlet, providing minimum clearance as
shown.

More than 20cm (7.9 in.)

More than

10cm (3.9 in.)

l

More than 11 cm

More than 30cm (11.8 in.)

22

FT1008/1208  f El-B 619

2 2 - 2 3

Содержание FT 1008


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды