T
echnical
B
ulletin
PAGE: 1/1
Model:
Booklet Finisher SR5040(D512)
Date:
28-Dec-11
No.:
RD512003
Subject:
Specification of Booklet Cover Sheet
Prepared
by:
Shinnosuke Sasaki
From:
1st Tech Service Sect., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other (Additional
information)
Tier 2
This RTB has been issued to announce additional information on the paper specifications
of the Booklet Finisher SR5040.
Specification of Booklet Cover Sheet
Please add the following information to your booklet finisher service manual:
One sheet of 163gsm paper can be used as a cover for a booklet. This cover is
counted as 3 sheets of signature for the booklet.
Appendices
>
1. Appendix: Specifications
>
Peripheral Specifications
>
Booklet Finisher
SR5040/5030 (D512/D513)
>
Booklet Stapling
Example
Booklets can be created as follows:
z
One sheet of 163gsm paper for cover and 17 sheets of 80gsm paper for the signature
In this case, the 163gsm cover is counted as 3 sheets of 80gsm paper.
z
One sheet of 163gsm paper for cover and 12 sheets of 90gsm paper for the signature
In this case, the 163gsm cover is counted as 3 sheets of 90gsm paper.
Note
Although the software does not strictly limit the behavior of the booklet finisher within its
specifications, quality of the booklets created beyond specifications will not be guaranteed.
Customers shall be responsible for creation of such booklets.