T
echnical
B
ulletin
PAGE: 1/1
Reissued: 14-Sep-11
Model: Finisher SR5040/SR5030 (D512/D513) Date:
20-Jun-11 No.:RD512001a
Subject:
Firmware Release Note: Finisher SR5040/SR5030
Prepared
by:
N.Iida
From:
PPBG Service Planning Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other (Firmware)
Tier 2
This RTB has been issued to announce the firmware release information for the
Finisher.
Version
Program No.
Effective Date
01.040:01
D5125620D
November 2011 production
01.030:01
D5125620C
1st Mass production
Version
Modified Points or Symptom Corrected
01.040:01
Plockmatic and GBC Punch are supported with this combination (Engine,
System/Copy), Fiery ver 1.2 and SR5030/5040 D5125620D(01.040:01)
Added Functions/Modified Specifications:
-
The following functions are invalidated when the system includes the
Plockmatic:
Shift tray full detection
Shift tray elevation
Shift tray jogger motion
-
If the Plockmatic does not acknowledge completion of a feed out for 2
seconds, jam in the Plockmatic is sent to the mainframe.
-
Since manual stapling is not supported by Plockmatic (BK5030)
specification has been modified to suspend printing by issuing "jam"
status during manual stapling operation.
Symptoms Corrected:
-
If the paper entrance sensor of the Columbia momentarily detects
paper during the initial sensor check, the Columbia sends to the
mainframe a "wait" signal one time but not a "jam" signal and
remains in waiting status.
The mainframe cannot detect the anomaly and attempts to print as
soon as completing the warm-up process. However, the Columbia
is in a "wait" status, and therefore, printing is suspended although
the control panel displays "printing".
Specifications have been modified to issue a "jam" status and
suspend printing if the paper entrance sensor of the Columbia
detects paper even if momentarily during the initial check process.
01.030:01
1st Mass production