Ricoh DDP70, Руководство по обслуживанию

Страница: 107 / 137

6-32
DDP70 Finisher Maintenance Manual M M L 0 0
6.7.3. Adjusting the By-pass Gate
Applicable jigs and tools:
⊕
Screwdriver.
[Disassembling Procedures]
1. Remove the Rear Cover. (Refer to item 6.1.1 on page 6-1)
[Adjustment Procedures]
1. Open the Front Cover and open the Guide Plate C.
Figure 6-54. Adjustment of the By-Pass Gate
2. When the By-Pass Solenoid (SD5) is OFF, check that the distance between the
By-Pass Gate and the Guide Plate D is the value stated below:
Value: 5.2 ± 0.5 mm.
3. When the By-Pass Solenoid (SD5) is ON, check that the gap between the Sole-
noid Plunger and the Bracket Stopper is the value stated below:
Value: B = 5.0 ± 0.5 mm.
Figure 6-55. Adjustment of the By-Pass Gate
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.
GUIDE PLATE C
GUIDE
SD5
BY-PASS GATE
A = 5.2±0.5 mm
B = 5.0±0.5 mm
PLATE D