Ricoh DDP70, Руководство по обслуживанию

Страница: 105 / 137

6-30
DDP70 Finisher Maintenance Manual M M L 0 0
6.7.2. Adjusting the Paper Route Switching Gate
Applicable jigs and tools:
⊕
Screwdriver.
[Disassembling Procedures]
1. Remove the Rear Cover and the Top Cover. (Refer to item 6.1.1 on page 6-1)
[Adjustment Procedures]
1. When the Gate Solenoid (SD1) is ON, check that the distance between the
Shorter Gate and the Guide Plate C is the value stated below:
Value: A = 5 ± 0.5 mm.
2. When the Gate Solenoid (SD1) is ON, check that the gap between the Solenoid
Plunger and the Bracket Stopper is the value stated below:
Value: B = 5 ± 0.5 mm.
Figure 6-52. Adjustment of the Paper Route Switching Gate
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.
A = 5±0.5 mm
GATE
GUIDE
SD1
PLATE C