![Ricoh D391 Скачать руководство пользователя страница 434](http://html1.mh-extra.com/html/ricoh/d391/d391_service-manual_1456090434.webp)
The trimmings box full sensor (S97) and its actuator, and the trimmings buffer full sensor pair (S96E, S96R),
check the level of the trimmings accumulated in the trimmings box [1] and the trimmings buffer [2]. At power
on and during machine operation:
• When the pile of trimmings in the box grows high enough to push the actuator [3] up and turn trimmings
box full sensor (S97) ON twice, this signals that the box is almost full. The cutter control board issues
a warning to the host machine that the trimmings box is almost full.
• If the sensor (S97) is turned on twice and the trimmings buffer full sensors (S96E, S96R) turn ON, this
signals that the trimmings buffer and the trimmings box are full. The cutter control board issues a
warning to the host machine that the trimming box is full.
• In both cases operation cannot continue until the trimmings box has removed, emptied, and reinstalled
by the operator.
The capacity of the trimmings box is limited to the amount of trimmings generated by trimming the edges
of about 15 books (B5 to A4 size) of 100 pages each (about 1,500 strips).
Stacking Trimmed Books
The trimmed books are sent to the book stacking unit where the books are delivered to the output tray for
removal from the bookbinder by the operator.
6. Details
432
6
Содержание D391
