Ricoh D182, Обучение по обслуживанию

Страница: 78 / 124

78
OR-C2 Training
Slide 78
Shift Tray – Side-to-side Mechanism

Shift motor: Moves the shift roller from side to side, after
the paper eject sensor detects the trailing edge of the
paper

After the sheet is fed out, the shift roller moves back to
home position

Detected by the shift HP sensor
Shift
Motor
Shift HP
Sensor
Paper Eject
Sensor
Shift Roller

This is basically the same as the B793 finisher.

The shift roller moves the sheet to one side while it is fed out.

All sheets of the same set are moved across to the same side, one at a time.
Then, for the next set, the shift roller moves in the opposite direction.

The shift roller goes back to home position after it feeds out each page.

Home position is in the middle.

In shift mode, if the set is one sheet, the motor moves every sheet. In this case,
the output speed of the finisher is reduced to 60%.