Ricoh D009, Руководство по обслуживанию

Страница: 849 / 1165

Fax Option Installation
SM 3 D346
Fax Op
tion
Ty
pe 5
000
D34
6
1. Attach the serial number decal near the serial number plate of the mainframe.
2. For NA models , attach the FCC decal near the serial number plate of the mainframe.
3. Remove the FCU cover [A] ( x 3).
4. Press down the MBU .
ƒ Make sure that the MBU is seated correctly. If not, SC672 occurs.
5. Remove the jumper [B] (set to OFF) and set it to ON.
ƒ The machine may issue SC819, SC820 if the jumper is not set to "ON"
correctly. (Sometimes these SC codes are not issued.)
6. Install the FCU [C] ( x 4; use the three screws which were removed in step 3).
7. For EU models , attach the ferrite core to the telephone cord. The end of the ferrite
core must be about 5 cm (2.1") [D] from the end of the cable.