Ricoh D009 Скачать руководство пользователя страница 622

Страница: 622 / 1165

Image Fusing

D009/D011/D012/D013 6-72

4. Fusing

Temperature

Check:

The machine decides whether the CPM down mode is activated or not when the fusing

temperature (center) does not reach the specified temperature.

Low temperature condition: SP1-916-026 to -030 (default: 120 °C)

Medium temperature condition: SP1-916-031 to -035 (default: 120 °C)

5. CPM Setting in the CPM Down Mode

The machine changes the CPM when the machine goes into the CPM down mode.

Low temperature condition: SP1-916-036 to -040

Medium temperature condition: SP1-916-041 to -045

6.15.10 PAPER FEED WAITING MODE

When this machine gets a sequence of coping/printing jobs, the machine uses paper feed

waiting mode to prevent insufficient fusing temperature.

The paper waits at the registration roller until the fusing temperature (center and ends)

reaches the correct temperature.

1. Paper Feed Waiting Mode On/Off Setting:

The paper feed waiting mode can be turned on or off with SP1-105-023 to -027 for each

paper type.

2. Threshold temperature for the paper feed waiting mode:

(Target tempe Paper feed temperature) – Paper feed waiting temperature =

Threshold temperature

Target temperature: SP1-105-001 (center) and -002 (ends)

Paper feed temperature: Fixed value (Not adjustable with SP)

Paper feed waiting temperature: SP1-105-028 to -037

3. Maximum

Waiting

Time

The machine gets out of the paper feed waiting mode after the maximum waiting time

has passed, even if the fusing temperature does not reach the threshold temperature for

the paper feed waiting mode (adjustable with SP1-105-38).

6.15.11 OVERHEAT PROTECTION

If the hot roller temperature becomes greater than 230

C, the CPU cuts off the power to the

fusing lamp, and SC534 or 553 (Fusing Overheat Error) will be displayed.

Even if the thermistor overheat protection fails, there is a thermostat in series with the

common ground line of the fusing lamp. If the temperature of the thermostat reaches 220

(center)/ 219

C (ends), the thermostat opens, removing power from the fusing lamp. At the

same time, the copier stops operating. At this time, SC534 or 553 (Fusing Temperature

Warm-up Error) will be displayed.

Содержание D009














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание D009

Отзывы:

Бренды по названию

Популярные бренды

Ricoh D009, Руководство по обслуживанию

Результаты поиска

Содержание D009

Отзывы:

Бренды по названию

Популярные бренды