134
10
A
ppendic
es
10 Appendices
Troubleshooting
Error Messages
If an error message is displayed on the screen, check the information
on the reference page and take the corresponding action.
Error Message
Cause and Solution
Refer to
Insert card.
No card is loaded. Insert a card.
P.27
Set date.
The date is not set. Set the date.
P.114
The file number limit has been
exceeded.
The file number limit has been exceeded. Use another card. P.114
Unmatched File
This file cannot be displayed on the camera. Check the file
contents on your computer, and then delete the file.
—
Insufficient memory. Continue?
All the files cannot be copied because there is insufficient
memory on the card. Use another card.
—
Protected
The file selected for deletion is protected.
P.104
Card Is Write-Protected.
The card is locked (write-protected). Unlock the card.
P.25
Print settings cannot be applied
to this file.
This file (movie or other file) cannot be selected for
printing.
—
Insufficient Memory
Files cannot be stored. Make sure there is sufficient
memory or delete unwanted files.
P.42,
P.110
The image print number limit has been exceeded. Select an
image and set the number to 0.
P.122
Format internal memory.
The internal memory requires formatting.
P.110
Format card.
The card is not formatted. Format the card with this
camera.
P.110
Card Error
SDXC cards can not be used. If the card is not an SDXC card,
format the card; if the message persists, the card may be
faulty and should not be used.
P.110
Writing Data
Writing file to memory. Wait until writing finishes.
—
No File
There are no files that can be played back.
—
Out of memory. cannot record.
The number of remaining shots is 0. Switch to another card
or the internal memory.
P.25
No files to restore.
There are no files to restore.
P.95
Can not —. *
Selected option can not be applied to image more than
once, or image was created with different make of camera.
If image was created with different make of camera,
process image using original make of camera.
—
* “—“ indicates the name of the process that can not be applied.